The Truma Mover SR2 is for caravans with single axle caravans. The electronics have a softstart and stopfunction. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control (868 MHz) with push buttons. You can turn the caravan around the axle.
This is a semi-automatic mover. A 120 degree rotation of a wrench – and some manpower – is needed to apply the drive rollers to the caravan tyres. The actuation of the rollers is simple. With the provided crossbar both sides press simultaneous in the tires. De afgelegde afstand bij het aanzwenken is 4 cm. De rollen staan ongeveer 2 cm van de band afgesteld, de druk van de rol in de band is dus maximaal 2 cm. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope.
The manufacturer recommends this mover for caravans up to 2000 kg /13%. We expect with our advise taking a short slope of 20% should be no problem, thus our advise with our set 2 for this mover is for caravans with a maximum weight of 1750 kg. The actual weight of the mover itself (our measurement) without battery is approximately 35 kg. The mover is low in weight. the Truma mover SR2 is an upgrade of the old Truma SR mover.
Phone and email
Our customer service is on working days available until 17.00 on